Building damp-free cavity walls
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Building damp-free cavity walls (GG 33 revised) was written by Barry Reeves and Chris Scivyer and published by BRE on 18 March 2015.
In driving rain, water leaks through the outer leaf of most cavity walls, often in quite large quantities. Provided the damp-proofing measures are correctly designed and installed and the wall itself is reasonably free from defects, this water does not reach the inner leaf, but flows harmlessly down the cavity face of the outer leaf until it reaches the footings or is directed out of the cavity via cavity trays or window/door lintels.
However, even though many cavity wall details are long-established and designed with the express purpose that the inner leaf stays dry, dampness is still a common problem. This is generally due to faulty design or construction of damp-proofing measures or the wrong choice of materials.
This 6-page Good Building Guide replaces guidance published in 1999, and offers advice about how to ensure new cavity walls do not suffer from damp. It is intended for architects and other designers, engineers, site managers, house builders and masonry contractors.
Its contents are:
- Introduction.
- Defects in the outer leaf.
- Problems caused by wall ties.
- Defects linked to cavity insulation.
- Where damp-proof courses and cavity trays are needed.
- Installing damp-proof courses.
- Installing cavity trays.
- Weepholes.
- Conclusion.
- References.
- Further reading.
[edit] Find out more.
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- BREEAM.
- Building Research Establishment.
- Cavity tray.
- Cavity wall.
- Damp in buildings.
- Damp proof membrane.
- Damp proofing.
- Damp-proof course.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Penetrating damp.
- Understanding dampness.
- Wall ties.
- Weep hole.
Featured articles and news
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
ECA progress on Welsh Recharging Electrical Skills Charter
Working hard to make progress on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Heat pumps, vehicle chargers and heating appliances must be sold with smart functionality.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
New-style degrees set for reformed ARB accreditation
Following the ARB Tomorrow's Architects competency outcomes for Architects.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.
Preserving, waterproofing and decorating buildings.
Many resources for visitors aswell as new features for members.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Comments
Building damp-free cavity walls involves proper design, construction, and maintenance to prevent the accumulation of moisture within the cavity space. Cavity walls are constructed with an outer and inner leaf separated by a gap known as the cavity. Here are some essential steps to ensure damp-free cavity walls:
1. Proper Design:
Ensure that the cavity wall system is correctly designed to include adequate ventilation and drainage measures. A well-designed cavity will allow water to drain away from the wall effectively.
2. Quality Materials:
Use high-quality materials for the cavity wall construction. This includes appropriate bricks or masonry for the outer and inner leaves, along with durable cavity wall ties and insulation.
3. Cavity Wall Insulation:
Proper insulation helps regulate the internal temperature of the building and prevents condensation. Use suitable insulation materials, and ensure they are correctly installed without gaps or voids.
4. Damp-Proof Course (DPC):
Install a damp-proof course between the inner and outer leaves of the wall. The DPC acts as a barrier to prevent moisture from rising from the ground and entering the building.
5. Cavity Wall Ventilation:
Incorporate ventilation openings at the top and bottom of the cavity to allow air circulation and moisture escape. This helps to maintain dry conditions within the cavity.
6. Cavity Wall Weep Holes:
Weep holes are small openings at the bottom of the cavity wall that allow any water that enters the cavity to drain out. These weep holes should be kept free from obstructions.
7. Cavity Wall Flashings:
Use appropriate flashings, such as lead or plastic, around openings like windows and doors to prevent water from entering the cavity.
8. Regular Inspection and Maintenance:
Periodically inspect the cavity walls for any signs of damage, cracks, or issues that may lead to water penetration. Address any problems promptly to maintain a damp-free cavity.
9. External Landscaping:
Ensure that the ground level surrounding the building slopes away from the walls. This helps to divert rainwater and prevents it from collecting around the base of the building.
10. Address Water Leakage:
If you notice any water leakage or dampness within the cavity wall, investigate the source of the problem and rectify it immediately. This may involve repairing or replacing damaged flashings, weep holes, or pointing.
By following these guidelines and using best practices in cavity wall construction, you can significantly reduce the risk of dampness and ensure the longevity and integrity of the building's structure. It's essential to work with experienced architects, builders, and construction professionals to ensure that all the necessary measures are taken to create damp-free cavity walls.